Haida Adapter Canon 14 2.8L II and Ring for 150 Series Holder 150 Holder not included

The Haida Adapter Canon 14 2.8L II and Ring for 150 Series Holder (150 Holder not included) is designed to allow for the convenient use of 150mm wide, 2mm thick filters with a Canon EF 14mm f/2.8L II USM lens while minimizing vignetting. Adapter ring lens collar can also be slid over the rear of the lens. The adapter ring lens collar can then be screwed into the adapter ring to lock both components into place.

This Haida Adapter Canon 14 2.8L II and Ring for 150 Series is pre-installed with two pairs of filter slots, a configuration that accommodates two rectangular filters. Also included is a third pair of filter slots and a second set of screws designed to attach all three pairs, which allows up to three rectangular filters to be used at the same time.

To prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens, two gaskets are positioned along the front of the filter holder. These gaskets are designed to form a seal between the pairs of plastic filter slots.

Key Features of the Haida Adapter Canon 14 2.8L II and Ring for 150 Series Holder (150 Holder not included)

• Allows filters to be conveniently used with a Canon EF 14mm f/2.8L II USM lens while minimizing vignetting
• Holds 150mm wide, 2mm thick filters
• Preconfigured to hold two rectangular filters and can accommodate up to three rectangular filters
• Screw-on locking pin. 360° rotation on the adapter ring
• Gaskets help to prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens
• Aluminum-alloy
• MPN - HD150-3218
• GTIN - 6900574107164