Jupio Prime Triple Charger and Card Holder - Sony FZ100

The Jupio Prime Triple Charger and Card Holder - Sony FZ100 can charge and store 3x 7.2v lithium camera batteries at the same time which offers you a stronger applicability. Charging is controlled by the microcomputer (MCU) and has a very accurate charging control. The charging indicator mode is displayed by the four LED lights. There is space for at least 3x SD-Cards, 3x MicroSD cards and 3x CFexpress cards in the designated built-in storage slots.

Place 1 to 3 Suitable batteries in the charger and then connect the charger to a power supply through the USB Type-C input port. When the charger is connected and the battery is installed correctly, the LED flow state shows the battery check. This charger can charge 3x 7.2v lithium batteries at the same time. When the batteries are fully charged, four LEDs will light up.

Note: it's a normal phenomenon that the battery gives out a little heat while charging. Place the charger in a well-ventilated place where heat can be easily dissipated to ensure the battery can be charged properly.

When the charger is not connected to the USB power supply and the battery is installed correctly, the LED will display the battery power.

It is not possible to charge the batteries and use the charger as a power bank at the same time...

Key Features of the Jupio Prime Triple Charger and Card Holder - Sony FZ100

• Smart Charging: With the included USB-C cable, you can charge up to three batteries at once, saving you time and ensuring you're always ready for action.
• Versatile Power Bank: But wait, there's more! Tri-Charge transforms into a portable power bank, allowing you to harness the stored energy in your fully charged camera batteries. Simply connect your USB devices, such as smartphones and tablets, using the provided USB-C cable, and bring them back to life on the go.
• Fast Charging: For an even quicker charge, pair Tri-Charge with any USB-C Power Delivery (PD) charger. Experience unparalleled speed and efficiency, ensuring you spend less time waiting and more time capturing unforgettable moments.
• Wide Compatibility: Tri-Charge caters to most major camera systems and brands, with variants designed specifically for this Sony NP-FZ100.
• Bright LED Indicators: Each battery bay features four vibrant orange LED lights, providing clear visual cues about the charging status of your batteries. Stay informed at a glance!

Charging indicator

When the battery is installed correctly and the charger is connected to a power supply, the LED display shows the power of the corresponding battery channel. 4 LED lights mean fully charged, and 3 LED lights mean 75% power. if the last LED light flashes, it means the battery has no power. When no power source is connected and only the batteries are installed, the LED will light on for about 10 seconds, and after 10 seconds, it will turn off. Press the button when you want to check the power again.

Use as a power bank

Place 1 to 3 Suitable batteries in the charger and then connect a USB device such as a mobile phone via the USB Type-C output port and use this charger as a power bank. Currently the USB Type-C port, depending on what the device demands, is 5V 2A. The charging function of the USB device stops when the charge is connected to a power supply. The batteries are discharged alternatively. After the first one is discharged, the second one will be discharged.

Warning

• Do not charge damaged batteries to avoid short circuits and fire.
• Only charge the designated rechargeable lithium batteries. Charging other types of batteries may cause an explosion, battery bursting or leakage, personal injury, or property damage.
• Improper use of the charger may cause electric shocks.
• The proper function is designed for indoor use. Do not expose the device to rain or snow.
• Store the charger in a clean, dry and airy indoor space with an ambient temperature between -10°C and 50°C
• Do not disassemble or assemble the charger
• Do not drop the charger on the ground