Seat-Pack QR Dark Sand 13L

The waterproof Seat-Pack QR is your perfect companion for all types of bike adventures, whether you're exploring singletrack, mountain passes, or gravel routes. Its innovative and patented Seat-Lock attachment system, along with abrasion-resistant nylon fabric, ensures stability and quick mounting and removal without leaving any residue. Plus, with a special adapter just 4.3 centimeters wide, this bag can be used with a dropper post. Inside, the bag features internal reinforcement and five compression straps to securely pack your gear. A valve with a handle strap helps compress the pack volume, while an elastic cord on the outside allows for additional gear attachment. For added protection from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. Features:

• Our reflector ensures added visibility and safety.
• A daisy chain allows for the attaching of a rear light.

YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13 mm from the middle of the bend in the saddle rail. There must also be at least 13 mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14 mm higher than the bottom edge of the saddle rail. THE FOLLOWING PRODUCTS ARE NOT SUITABLE:

• Saddles with carbon fiber rails
• Suspension seatposts
• Saddles with unusual saddle rails e.g. SQLab Active, Brooks B67 (see point 2 above)
• Electronic dropper posts e.g. Rock Shox AXS or Magura Vyron

If you still have problems mounting the Seat Pack QR for the first time, try moving the Seat Lock System as far forward on the bag as possible and loosen the bolts to find a fitting position. This is the easiest position for initial mounting – you can then adjust the position for the best fit. The fitting instructions have further information and tips. Part number: F9904 Barcode: 4013051056496