Dymaxion Diamond Core Drill Bits For Granite, Hard Porcelain, Polymer Concrete in Hand Drills / Core Drill CGS Series

Features

• Can be used for coring polymer concrete and plastic/glass cable joining pits. Avoid overheating by quenching in water.
• Suitable for cutting hard porcelain and granite bench tops. Ensure plenty of water to cool and remove waste from the cut.
• Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
• Drilling methods and techniques vary significantly depending upon the material being drilled.
• To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
• Variable speed drills work best since the correct speed can be selected.
• Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
• The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
• Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
• You should consider that they aren't "drilling" a hole - they are "grinding" a hole.

Application

Suitable for Granite, Hard Porcelain and Polymer Concrete.

Specification

Brand: Dymaxion

Pack Qty: 1

Pack Type: Single

Packaging: Telepak

Thread / Shank: 12mm HEX or 1/2" BSP Female + Hex Mandrel (depending on Core Drill Size - Refer Options Table)

Ideal For: Granite, Hard Porcelain and Polymer Concrete.

Suits:

Variable speed hand drills work best since the correct speed can be selected.

Description:

12mm HEX shank NO Pilot Drill required. or 12mm HEX Shank Mandrel with Taper TCT Pilot Drill and wedge key (refer options table for clarification)

Note: Internal depth 50mm.

Options

Diameter Overall Length Max Core Depth Connection Part Number

6 mm 65 mm 50 mm 12 mm Hex Shank CGS6-65

8 mm 65 mm 50 mm 12 mm Hex Shank CGS8-65

10 mm 65 mm 50 mm 12 mm Hex Shank CGS10-65

12 mm 65 mm 50 mm 12 mm Hex Shank CGS12-65

16 mm 65 mm 50 mm 12 mm Hex Shank CGS16-65

19 mm 65 mm 50 mm 12 mm Hex Shank CGS19-65

22 mm 65 mm 50 mm 12 mm Hex Shank CGS22-65

25 mm 65 mm 50 mm 12 mm Hex Shank CGS25-65

29 mm 65 mm 50 mm 12 mm Hex Shank CGS29-65

32 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS32-65

35 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS35-65

38 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS38-65

48 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS48-65

51 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS51-65

54 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS54-65

57 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS57-65

60 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS60-65

64 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS64-65

70 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS70-65

75 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS75-65

90 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS90-65

95 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS95-65

115 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS115-65

117 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS117-65

165 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS165-65

180 mm 65 mm 50 mm 1/2" BSP + Hex Mandrel CGS180-65