A Grade Refurbished Roborock Saros 10 Robotic Vacuum Cleaner

We've redefined convenience with the Saros 10, now featuring the cutting-edge NEW Generation RockDock® Ultra for quick 2.5-hour charging. Its ultra-slim 7.98cm (3.14 inches) design effortlessly fits into tight spaces, while the advanced VibraRise® 4.0 Mopping System ensures a deep, thorough clean. With ReactiveAI 3.0 Obstacle Recognition, it expertly detects and navigates around obstacles, making every cleaning session smarter and more efficient. Say goodbye to constant maintenance and enjoy uninterrupted performance with the Saros 10.

Ultra-Thin Design

The Thinnest Roborock to Make a Big Difference

The RetractSense™ Navigation System lowers its LDS to pass under low-clearance areas and rises again in open spaces, all while featuring Roborock's slimmest design yet.*

*Based on research conducted by Roborock, as of January 2025, the Roborock Saros 10 is the thinnest model among Roborock's vacuum robots.

Meticulous LiDAR

Clear Vision, Even When LiDAR Is Retracted

The Wide-Angle Vision Module enables the LDS sensor to retain a broad view when lowered, ensuring smooth navigation and preventing mapping loss in low-clearance areas.

Clever Decisions, Even in Challenging Spaces

The Upward Range Finder adjusts the LDS height for smooth mapping through low-clearance areas, while the Top Contact Sensor prevents forced entry and surface scratches by detecting obstacles in real time.

AdaptiLift™ Chassis

Overcome Barriers, Expand Possibilities

With a clearance of up to 1.57 inches (4cm)-featuring the industry-first AdaptiLift™ Chassis* -Saros 10 effortlessly crosses doorways, managing 1.18 inches (3cm) thresholds with an additional 0.39 inches (1cm) track for double-layer thresholds, or up to 1.18 inches (3cm) for single-layer thresholds, ensuring uninterrupted cleanliness.

Lift the Chassis for Higher Pile Carpets

Saros 10 elevates the chassis up to 0.39 inches (10mm) on high-pile carpets, reducing suction port blockages from long fibers.

*Roborock was the first in the robot vacuum industry to mass-produce a product featuring a liftable chassis system withthree-wheel control, officially launching this technologyin Q3 2024.

DuoDivide™ Main Brush

Hair Tangling? Divide and Conquer

The DuoDivide™ Anti-Tangle Brush transports collected hair to the dustbin inlet in the center, where the hair is stripped off and powerfully suctioned into the dustbin.

Next-Level Suction Power

22,000Pa HyperForce® Suction Power*

*Based on Roborock internal testing. Actual results may vary depending on usage conditions.

FlexiArm™ Riser Side Brush

Asymmetrical Spiral Arc

Curved spiral arms guide debris and hair, reducing tangles by directing flow to the suction inlet.

Soft Rubber Baffle

The soft rubber baffle blocks hair, preventing it from wrapping around and causing tangles. Longer side brush bristles increase coverage and enhance hair-gathering efficiency.

Enhanced, in Pretty Much Every Way

Mop, Unclip!

The vibrating mop of Saros 10 automatically detaches in modes where mopping is not needed, such as Vacuum Only and Vacuum Carpets First, ensuring high-pile carpets stay as dry as possible.

VibraRise® 4.0 Mopping System

Larger, Harder, Smarter

The VibraRise® 4.0 Mopping System features a denser, more absorbent mop that locks in moisture for effective stain removal. Dual sonic vibrating zones at 4,000 times/min each, up to 8N pressure, and a 26% larger vibration area ensures superior mopping performance*

Mop Again Harder for Stubborn Stains

In AI Laboratory mode via the Roborock App, Saros 10 detects wet stains, lifts its omni wheel, and increases mop pressure for a deeper clean.

Side Mop Independent Lifting

The edge mop can now independently lift from the main mop, lowering only when detecting edges to ensure optimal edge-cleaning performance.

Edge and Corner Cleaning

100%

Edge and Corner Sweeping*

0.00508 cm (0.002 inches)

Edge-Close Mopping*

*Certification No. 0217010051 by TÜV Rheinland. Actual results may vary depending on