Fluke FLK-a3001-FC-KIT - Wireless iFlex AC Current Clamp Kit - FC Series

Connect the a3001 FC Wireless AC Current Module and flexible current probe to your test point, and view the results up to 20 meters away on the 3000 FC Wireless Digital Multimeter. You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke Connect™ modules as a system for multiple measurements. From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the FC Wireless AC Current Module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Includes

TL175 Test Leads AC175 Alligator Clips iFlex i2500-10 Flexible Current Probe

Features Fluke 3000 FC Series Wireless Multimeter

AC and DC voltage measurements to 1000V AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54

Fluke a3001 FC Wireless iFlex AC Current Module

Measure up to 2500 A AC Use as a standalone meter or as part of the system Logging function for recording and saving up to 65,000 readings Inrush function

Specifications Fluke 3000 FC Series Wireless Multimeter

Maximum voltage between any terminal and earth ground: 1000 V DC or AC RMS Ω fuse protection from A inputs: 0.44 A (44/100 A, 440 mA), 1000 V FAST fuse (Fluke specified part only) Display (LCD)

Update rate: 4/sec Volts, amps, ohms: 6000 counts Frequency: 10,000 counts Capacitance: 1,000 counts

Battery type: Three AA alkaline batteries (NEDA 15A, IEC LR6) Battery life: 250 hours minimum RF communications: 2.4 GHz ISM band RF communication range

Open air, unobstructed: Up to 20 m Obstructed (sheetrock wall): Up to 6.5 m Obstructed (concrete wall or steel electrical enclosure): Up to 3.5 m

Temperature

Operating: –10 °C to 50 °C Storage: –40 °C to 60 °C

Temperature coefficient: 0.1 × specified accuracy per °C (18 °C or 28 °C) Relative humidity

0% to 90% (0 °C to 35 °C) 0% to 75% (35 °C to 40 °C) 0% to 45% (40 °C to 50 °C)

Altitude

Operating: 2,000 m Storage: 12,000 m

Electromagnetic compatibility

EN 61326-1:2006; EN 61326-2-2:2006 ETSI EN 300 328 V1.7.1:2006 ETSI EN 300 489 V1.8.1:2008 FCC Part 15 Subpart C (Sections 15.207, 15.209, 15.249) FCC ID: T68-FDMMBLE; IC: 6627A-FDMMBLE

Safety compliance

ANSI / ISA 61010-1 (82.02.01), 3rd edition CAN / CSA-C22.2 No. 61010-1-12, 3rd edition UL 61010-1, 3rd edition IEC / EN 61010-1:2010

Certifications: CSA, FCC, CE Ingress protection (IP) rating: IP54 Pollution degree: 2 Size (H × W × L): 4.75 × 9.3 × 20.7 cm (1.87 × 3.68 × 8.14 in) Weight: 340 g (12 oz) Warranty: Three years

Fluke a3001 FC Wireless iFlex AC Current Module

AC current

Range: 0.5 A to 2500 A AC Resolution: 0.1 A Accuracy: 3% ±5 digits (5 Hz to 500 Hz) Crest factor (50 Hz / 60 Hz)

3.0 at 1100 A 2.5 at 1400 A 1.42 at 2500 A Add 2% for crest factor 2

Display: LCD with backlight, 3½ digits Log rate / interval: 1 second minimum, adjustable by PC or front panel Battery type: 2 × AA (NEDA 15A, IEC LR6) Battery life: 400 hours Memory: Record up to 65,000 readings RF communications: 2.4 GHz ISM band RF communication range

Open air, unobstructed: Up to 20 m Obstructed (sheetrock wall): Up to 6.5 m Obstructed (concrete wall or steel electrical enclosure): Up to 3.5 m

Operating temperature: –10 °C to +50 °C Storage temperature: –40 °C to +60 °C Temperature coefficient: Add 0.1 × specified accuracy per °C (18 °C or 28 °C) Operating humidity

90% at 35 °C 75% at 40 °C 45% at…