TruaCut 1/4" Shank 16mm x 1.6mm Rounding Over Router Bits with Bearing TB502 / TB502S

Rounding Over Bits

Rounding over bits are the most used of all the edge forming router bits. They are used for just breaking the sharp edge on a job as well as  cutting decorative edging to form drop leaf joints. (Matching jointing bits are the Cove Bits.)  Fitted with Mark free 12.7 x 4.8mm (B105)  ball bearing guide these bits tend not to burn the  work surface. The bit can also be converted into Beading bits just by changing to a smaller  bearing (B106). The ball bearing fitted very close to the bottom cutting edge so as to allow full round over cut to be made with the bearing just being guided along a very narrow flat section on the  bottom of the job. (the round over section just feathering out) Not many manufactures pay  enough attention to this very important specification demanded by the tradesman.

All TruaCuT shaped bits have the full body Anti-Kickback design. Combined with close fitted bearings. ie. No large gap between the cutting edge & bearing.

Specification

Part Number: TB502 TB502S

Brand: TruaCuT TruaCuT

Barcode: 9326186001695 932618 6009950

Style: Rounding Over Rounding Over

Hand Held Router: ✓ ✓

Router Table/Bench: ✓ ✓

CNC: ✓ ✓

For Routing: Timber Timber

Tungsten Tipped: ✓ ✓

R1 (Radius) mm: 1.60 1.60

(A) Diameter inch: 5/8 5/8

(A) Diameter mm: 16.0 16.0

B1 (Cutting Depth) mm: 10 10

Shank Size inch: 1/4 1/4

Shank Size mm: 6.35 x 32 6.35 x 32

Flutes #: 2 2

Bearing inch: 1/2 1/4

Bearing mm: 12.7 6.4

Description: Fitted with 12.7 x 4.8mm bearing (B105) Fitted with 6.4 x 3.2mm bearing (B107)